Acid Alloy Wheel Cleaner

Professional Strength

Product Overview

Acid Alloy Wheel Cleaner is a professional-strength, acid-based wheel cleaner formulated to remove heavy brake dust, road grime, and mineral contamination from alloy wheels. Containing hydrochloric acid, this powerful formula is designed to break down stubborn buildup quickly and effectively, restoring alloy wheels to a clean, bright finish with minimal effort.

This product is supplied in two formats — 5 Litre Concentrate and 500 ml Ready-to-Use / Dilutable — each with its own recommended dilution ratios. Ideal for professional valeters, workshops, and experienced users, it delivers fast, deep-cleaning performance where standard wheel cleaners are ineffective.

Key Features

• Professional-strength acid-based wheel cleaner

• Contains hydrochloric acid for aggressive brake dust removal

• Available in 5L concentrate and 500ml ready-to-use / dilutable formats

• Effective on heavily contaminated and neglected alloy wheels

• Fast-acting formula for professional efficiency

• Restores alloy wheel clarity and cleanliness

• Suitable for factory-finished alloy wheels when used as directed

Directions

Ensure wheels are completely cool. Rinse thoroughly with clean water before application.

5 Litre Concentrated – Dilution Guide

• Heavy Soiling: Dilute 1:3 (maximum strength before risking surface etching)

• Medium Soiling: Dilute 1:5 (ideal for regular cleaning and heavy brake dust)

• Light Soiling: Dilute 1:8 – 1:10 (for moderately dirty wheels)

• Very Light / Maintenance Cleaning: Dilute 1:15 – 1:20 (frequent touch-ups, minimal risk to finishes)

500 ml Bottle Is Ready to use but can be diluted to the following

• Heavy Soiling: Use neat or dilute 1:1

• Medium Soiling: Dilute 1:3

• Light / Maintenance Cleaning: Dilute 1:5

Directions

1. Spray evenly onto the wheel surface.
2. Allow a few minutes of contact time — do not allow the product to dry.
3. Agitate with a soft, acid-resistant wheel brush if required.
4. Rinse thoroughly with plenty of clean water.
5. Repeat if necessary for heavily contaminated wheels.

Important Notes

• Do not use on hot wheels or in direct sunlight.
• Do not allow product to dry on the surface.
• Do not use on bare aluminium, anodised, chrome, diamond-cut, custom-painted, or damaged wheels.
• Avoid contact with glass, polished finishes, rubber, and plastic trim.
• Always test on an inconspicuous area first.
• Wear protective gloves and eye protection during use.
• Keep out of reach of children and pets.
• Store upright in a cool place.

Health & Safety

• Contains hydrochloric acid.
• Causes skin irritation and serious eye irritation.
• May cause respiratory irritation.
• Avoid breathing fumes. Use only outdoors or in well-ventilated areas.
• Please refer to the Health & Safety tab for full hazard and SDS information.

Wheel Cleaner

(Non-Acidic)

Product Overview

A powerful, non-acidic formula that removes dirt, grime, and grease, restoring your wheels’ natural shine. Safe for all wheel types including alloy, chrome, painted, and clear-coated finishes. It cleans effectively without etching or damaging delicate surfaces. Ideal for regular use, this cleaner enhances the appearance of your wheels while helping to protect their finish and ensure a spotless, long-lasting result.

Directions

1. Rinse: If possible, rinse wheels with water to remove loose dirt.
2. Apply: Spray the Wheel Cleaner generously over the entire surface.
3. Agitate: Use a soft wheel brush or sponge to gently agitate and lift grime.
4. Wait: Allow the product to dwell for 2–3 minutes (do not let dry).
5. Rinse Off: Rinse thoroughly with clean water or wipe with a damp cloth.

Usage

Use through a hand spray to apply. For best results, agitate with a quality wheel brush. NON-ACID WHEEL CLEANER can also be diluted depending on the level of soiling. Always rinse with clean water after use. Suitable for regular cleaning and maintenance of alloy, chrome, painted, and factory-coated wheels.

Important Notes

• Do not use on hot surfaces or in direct sunlight.
• Test on an inconspicuous area before full application.
• Do not allow product to dry on the surface.
• Store in a cool, dry place, away from direct sunlight.
• Keep out of reach of children.