Floor Stripper

Product Overview

JN Supplies Floor Stripper is a powerful, professional-grade solution designed to remove old layers of polish, wax, dirt, and grime from hard floors. Ideal for deep-cleaning and floor preparation before re-polishing, this heavy-duty formula breaks down built-up coatings quickly, restoring surfaces for a fresh finish. Suitable for commercial, industrial, and domestic use.

What Is It Good For?

• Removing old polish, wax, and sealants from hard floors

• Preparing surfaces for recoating or polishing

• Restoring dull or dirty floors in high-traffic areas

• Improving adhesion of new finishes and sealers

• Quick and efficient results when used with a floor buffer and black pad

Directions

Step 1: Dilute 1 litre of Floor Stripper in 10 litres of hot or cold water.

Step 2: Mop the solution onto a section of the floor generously.

Step 3: Allow a few minutes for the product to break down the layers.

Step 4: Scrub using a floor buffer with a black pad or manually if needed.

Step 5: Immediately remove slurry with a mop or wet vacuum.

Step 6: Rinse thoroughly with clean water and let dry before applying new polish.

Dilution Ratios

• Normal use: 1 litre per 10 litres of water

• Heavy build-up: 1 litre per 5 litres of hot water

Do Not Use On

• Laminate, wood, vinyl plank, or sealed floors

• Surfaces with sensitive finishes or coatings

• Floors that don’t require stripping

• Any surface without thoroughly rinsing – residue may affect polish results

Recommended Aftercare

• Polish: Use JN Supplies Emulsion Floor Polish for a high-gloss protective finish 

• Maintenance: Follow up with JN Supplies Floor Gel for daily cleaning and upkeep