Coloured Beer Line

Cleaner & Pump Cleaner

Product Overview

A highly effective coloured beer line and pump cleaner designed to maintain hygiene and quality in beverage dispensing systems. The coloured formula provides a visible indicator to ensure thorough cleaning has been achieved throughout the lines. Ideal for use in pubs, bars, and restaurants to prevent build-up of yeast, mould, and bacteria, ensuring consistent drink quality and safe dispensing. Suitable for use in mechanical and electrical beer engines and compatible with most commercial pipework systems.

Directions

1. Turn off the gas supply and disconnect the keg.

2. Prepare the cleaning solution: Dilute 50ml of the product in 5 litres of cold water (ratio 1:100).

3. Flush the line with clean cold water to remove any remaining beverage.

4. Pump the coloured cleaning solution through the line until it is visible at the tap.

5. Leave to soak for 20 minutes.

6. Repeat flushing with the coloured solution until colour is retained in the line.

7. Rinse thoroughly with clean water until all traces of the coloured cleaner are completely removed.

8. Reconnect the keg and run the beer through until it flows clear and fresh.

Important Notes

Never mix with other chemicals. Always rinse thoroughly before and after use to avoid cross-contamination. Use gloves and eye protection when handling the solution. Ensure the colour is fully flushed out before returning the system to service.

Health & Safety

Please refer to the Health & Safety tab below for further information.