Microfibre Clay Mitt

Fast Reusable Clay Technology for Smooth Contaminant Free Paint

The Microfibre Clay Mitt offers a faster, more durable alternative to traditional clay bars for decontaminating vehicle paintwork. Combining a specialised clay impregnated side for contaminant removal with a soft microfibre side for buffing, this two in one tool streamlines the claying process. It quickly removes bonded contaminants, industrial fallout, and overspray from paint surfaces, leaving them perfectly smooth and ready for polishing or waxing. Unlike traditional clay, this mitt is washable and reusable, lasting up to five times longer than disposable clay bars.

Key Features and Benefits

· Fast Contaminant Removal The clay impregnated side quickly and effectively removes bonded contaminants, overspray, industrial fallout, and embedded dirt from paint surfaces.

· Reusable and Washable Unlike traditional clay bars that must be discarded if dropped, this mitt can be simply rinsed under a cold tap, inspected, and reused, offering exceptional value.

· Extended Lifespan Designed to last up to five times longer than standard clay bars, providing consistent performance through many detailing sessions.

· Two in One Design Features a clay side for decontamination and a soft microfibre side for buffing and finishing, reducing the number of tools needed.

· Safe and Effective When used with adequate lubrication, the clay mitt safely removes contaminants without damaging clear coats or paint finishes.

· Easy to Inspect The mitt format allows for easy visual inspection for contamination before, during, and after use.

Product Specifications

· Product: Microfibre Clay Mitt

· Design: Dual sided with clay impregnated side and microfibre finishing side

· Use: Paint decontamination, contaminant removal, overspray removal

· Features: Washable, reusable, up to 5 times longer life than clay bars

· Lubrication Requirement: Must be used with suitable detailing lubricant or spray

Instructions for Use

1. Ensure the vehicle surface is thoroughly clean and completely dry before beginning the claying process.

2. Prime the clay side of the mitt by spraying it with a suitable detailing lubricant or detailer spray.

3. Spray the same lubricant generously onto a small section of the paint surface.

4. Gently work the primed clay side over the lubricated surface using light pressure and straight line motions. Continue until the surface feels perfectly smooth to the touch, indicating contaminants have been removed.

5. Once the section is smooth, flip the mitt to the microfibre side and buff the surface to remove any residue and reveal the finish.

6. Work and finish one panel at a time, inspecting each carefully before moving to the next.

Care for Your Clay Mitt

· After use, clean the mitt thoroughly by rinsing in lukewarm water, gently working the fibres to release any trapped contaminants.

· Leave the mitt to dry flat in a cool, dry place away from direct sunlight.

· Never wring or twist the mitt aggressively as this may damage the clay impregnation.

Important Cautions

· Always use a suitable detailing lubricant or detailer spray. Never use the mitt on a dry surface.

· Always wear the mitt in on a glass surface first before using on bodywork to ensure it is free of any manufacturing residue.

· If you drop the mitt on the floor, wash it out thoroughly in clean lukewarm water and carefully inspect for contamination before reusing.

· It is essential to check the mitt for contamination before, during, and after each use to prevent scratching.

· If slight marring of the paint occurs, gently machine polish the affected area with a superfine finishing compound.

The modern, reusable solution for achieving silky smooth, contaminant free paint ready for the next stage of your detailing process.